1. Familiar with the gear:

Often, the position of the gear will be clearly imprinted on the handle handle. Knowing the gear is the first step.

2. Initial stage:

Put the gear into neutral, open the ignition switch, step on the clutch, cut into first gear, slowly release the clutch, with the throttle, start the car.

3. Acceleration process:

After starting the car, with the increase in engine speed, with different speed, cut into the corresponding gear.

4. Easy driving:

Even if you're new to the game, take your left foot off the clutch for a moment.

5. Matters needing attention:

Usually, when the speed increases to a certain extent, the engine will have an abnormal sound, at this time must be into gear.

6. Easy operation:

It doesn't take a lot of effort to change gears. If the car is older, you can stay in neutral for a while and then cut into other gears.

7. Control clutch:

When changing gear in the running of the car, the control clutch pedal should be quickly stepped down and raised, do not appear half engaged phenomenon, do "fast - slow - fast".

8. Gear reduction:

The principle is the same, but it should be noted that when the speed is too fast, first reduce the speed to the corresponding range, and then shift gear