Driver's license exam is becoming difficult year by year, how can ability pass difficulty, how should course 2 exam deal with? It's a real headache. Here are some tips for those who want to pass subject 2. Please read them carefully and try to apply them to the actual exam.

Right-angle turning: after the implementation of the new driver's license regulations, right-angle turning site, the road length is equal to 1.5 times the length of vehicles, the width of the road for small vehicles wheelbase plus 1 meter.

Recruit: right Angle turn almost have no difficulty, the student take an examination of, want to learn to use from the car rearview mirror, observation right Angle turn left of mark line. When the left ear window of the vehicle passes this mark, be about to begin to hit steering wheel, can pass easily.

Curve driving: after the implementation of the new driving license regulations, the arc radius of C1 driving site curve is 7.5 meters. Vehicles must enter from one end of the s-shaped lane and exit from the other.

Action: the speed slows down, pay attention to the power of the steering wheel, Angle, do not speed too fast lead to insufficient steering. In addition, attention should be paid not to exceed or press on the yellow line.

Side parking: in the past, the side parking was standing on the ground with four posts, symbolizing the four corners of the garage. It is one of the standards whether the vehicle entered the garage smoothly and parked. After the implementation of the new rules, there will be no more benchmarking for side parking, and the garage boundary will be made in the form of above-ground marking.

Action: the steering wheel to the right to kill, behind the car; Look at the rearview mirror on the left side of the car, the back door handle should be about 3 cm away from the yellow line; Turn the steering wheel back, the car back, the steering wheel on the way to the left, and then normal turn signal out of the yellow box line.

Reverse parking: after the implementation of the new driver's license regulation, the piling test and field test will be combined, and the piling test for small cars will be changed to reverse parking.

Action: in preparation for storage, can pause for a short while, students can take this opportunity from the rearview mirror to observe the garage sideline, determine the Angle of the steering wheel when reversing. The body should maintain a distance of 1.5m to 1.8m from the sideline, and the infrared front pressure starts to slowly reverse; Rear door of the right side of the triangular window vertical lining should coincide with the yellow line at the upper right corner, the direction of the dead, you can reverse into the garage.

When practicing at ordinary times must use the clutch more, the academic society USES the clutch nimbly to control the speed, achieves both is slow, does not stop again, the speed maintains in 5 kilometers left and right sides, slowly completes the entire reversing lever movement.

Designated stops and starts on ramps: new driver's license regulations stipulate that steep slopes must be at least 10 degrees, and that a C1 driver's license must be at least 20 meters long. During the test, students must start within 30 seconds of stopping on a steep hill or they will fail. Action: one is to train at ordinary times, learn to use the clutch. During the test, once you get on the test car, you will know how high the clutch of the car needs to be lifted to be in the semi-clutch state.

Second, stop at the right spot. People's binocular vision will have a virtual error, clearly think they parked the car at a fixed point, but in fact has exceeded the parking line, or not to the parking line. In view of this situation, driving to the slope of the test site can be identified by the front windshield signs and line overlap, the car right front wheel should be 30 cm away from the yellow line, the front of the car stop on the yellow line. The fixed starting time shall not exceed 30 seconds. When starting, pay attention to gently loosen clutch and at the same time, step on the accelerator with a small range and then release the handbrake to prevent slipping back.